E51 Blueprint Front Brake Pad Set (3 IN STOCK)
TheseFront Brake Pads fit all E51 models
E51 Front Brake Pad Set. (10 SETS IN STOCK)
These front brake pads from Solid Auto a specialist Japanese parts company will fit all models of E51 from 2002 to 2010.
E51 and E50 Front Brake Pad Set (1 SET IN STOCK)
These top quality front brake pads by Delphi have wear sounders that alert you when they need replacing before they damage your expensive brake discs.
Front Brake pad set (2 SET IN STOCK)
This brake pad set by DriveTec will fit the front of all E50 and E51 models. A feature of these pads is the little spring steel sounding strip at the end of each brake pad that will make a noise when the pads becomes worn meaning you will not damage your brake discs by accidentaly wearing your pads down to the metal backing.
E51 and E50 Front brake pad set by Apec. (2 SETS IN STOCK)
These Front brake pads come complete with spring steel warning sounders on all 4 pads to give you advanced warning when they need replacing before they wear down and ruin your front brake discs. Made by Apec.
E51 Front Brake Disc Set (I SET IN STOCK. ) >>>>> READ ABOUT ITEM BELOW <<<<<
1 Pr of Front Brake Discs by Pagid, a top producer of quality brake discs and are finished in an aluminumised coating to help them last
E51 FRONT BRAKE DISCS (2) (1 SET IN STOCK)
These brake discs supplied by Solid Auto are in fact Pagid discs reboxed for sale by Solid Auto so you get the same aluminiumised discs in a red and white box instead of blue and at a cheaper price.
E51 Rear Brake Pad Set fits all models (2 IN STOCK)
These Rear Brake Pads are made by Blueprint a market leader in Japanese car parts.
E51 Rear Brake Pad Set (10 SETS IN STOCK)
These rear brake pads will fit all models of E51 from 2002 to 2010. They are supplied by Solid Auto and will come in a solid auto box or drivemaster depending upon stock..
E51 Rear Brake Pad Set fits All Models (2 IN STOCK,)
These Rear Brake Pads by PPF have wear warning springs fitted that make a noise before the pad wears out which helps save damage to your rear brake discs.
E51 Rear brake pad set by Apec. (1 SET IN STOCK)
These rear brake pads by Apec will fit all model E51s
Rear Brake Pad Set by Delphi (1 IN STOCK.)
This rear brake pad set has 2 plain pads and 2 with wear sounding clips on (ithese are your inner pads) As always DELPHI are good quality parts
E51 Rear brake disc set (NO STOCK)
These rear brake discs are top quality made by Apec and are sold as a pair.
E51 REAR BRAKE DISC SET (2 SETS IN STOCK)
These rear discs fit all models of E51 from 2002 to 2010)
E51 PARKING BRAKE SHOE KIT BY APEC (1 SET IN STOCK)
This set of rear parking brake shoes by APEC fit inside the rear brake discs.
Rear Brake Calliper UPPER Slide Pin (4 IN STOCK)
This is the top slide pin for either side upper position in the REAR Brake Calliper
Rear Brake Calliper LOWER Slide Pin (4 IN STOCK)
This is the bottom slide pin for either side lower position in the REAR Brake Calliper
E51 Rear Brake Caliper Slide Pin Kit (6 IN STOCK)
These rear slide pin kits include top pin, lower pin, 2 pin boots, end rubber for the pin and a pack of special slide pin grease and is suitable for one side rear on all E51s from 2002 to 2010.
E51 Oil Filter for all models up to 2007. (NO STOCK)
This filter by Solid Auto fits both 2.5 and 3.5 ltr E51s up to 2007. I am also supplying a FREE sump plug seal with this filter.
E51 Oil Filter. (2002 to Oct 2007) (10 IN STOCK)
Blueprint Oil Filter Fits the E51 2002 to Oct 2007 also fits the E50 fitted with the 3.5 litre V6 engine
E51 Oil Filter Oct 2007 to 2010 (8 IN STOCK)
This Mann oil filter not only fits the E51 from Oct 2007 to 2010 but also the E50 3.3 litre V6 engine
E51 Air Filter (NO STOCK)
This Air Filter by Solid Auto a market specialist in Japanese vehicles fits all E51s both 2.5 and 3.5 Ltr.
E51 Air Filter fits all E51 models. (10 IN STOCK)
This quality metal cased air filter element fits all the petrol V6 versions of the E50 and E51
E51 2.5 and 3.5 Air Filter (NO CURRENT STOCK)
This Purolator air filter fits the whole E51 model range from 2002 to 2010
V6 Petrol Air Filter (NO STOCK)
This filter fits all the V6 petrol engined range both E50 and E51
E51 Budget Front Cabin Filter (10 IN STOCK)
These Budget Pollen Filters are made by Purflux, Mann or Asaka and have a thinner more flexible outer casing than the factory original
E51 Rear Cabin Filter (21 IN STOCK)
After having problems with supply from Japan we decided to get an independent specialist filter manufacturer to make these filters for us and we are pleased with the result.. These Rear Cabin Filters fit behind the rear heater inlet grill in the N/S/R inner trim and are very easy to replace.
E51 NGK Longlife Platingum Sparkplugs (2 SETS IN STOCK)
These NGK Longlife Platingum Sparkplugs come as a set of 6. They are desidned to last at least 75,000 miles, dont be tempted to fit normal duty sparkplugs as after a few lost knuckles and an hours work you would have wished you had bought these.
E51 Radiator Cap (1 IN STOCK)
This Radiator Cap produced by Century in Japan fits all E51 models both 2.5 and 3.5 ltr from 2002 to 2010 and is rated at 88kPa (0.9kg/cm2)
E51 Alternator Belt (4 IN STOCK)
This multirib drivebelt fits the 2.5 and 3.5 Litre V6 engines
E51 2.5 & 3.5 Main Drive Belt (NO STOCK)
This Drivebelt is the main alternator / PAS belt supplied by Solid Auto but is a Dayco drivebelt as fitted as standard equipment on Peugeot Citroen etc.
E51 Air Con drivebelt (4 IN STOCK)
This Gates air con drivebelt fits all models E51
Front, Inner CV Boot Kit by Blueprint (4 IN STOCK)
This CV Boot Kit fits the FRONT, INNER position of the 4x4 E51 and is a Trilobe type having 3 rubber mouldings that fit the shape of the inner CV joint
Track Rod End (NO STOCK)
This Track Rod End by GMB/ Solid Auto will fit all models of E51 and comes complete with nut, & split pin.
E51 Outer Track Rod End (4 IN STOCK)
These Track Rod Ends by Blueprint fit the entire range of both E50 and E51 models.
Outer Steering Track Rod End by DELPHI. (2 IN STOCK)
This Track Rod End Fits Both The E50 and E51 models. Delphi are a top European parts supplier
E51 Steering Inner Tie Rod Left or Right (2 IN STOCK)
These Inner steering tie rods are suitable for left or right. You might also need the outer track rod end and steering gaitor kit.
E51 Front shockabsorber boot kit (4 IN STOCK)
This boot kit comes complete with the bump stop rubber and fits all E51 models
E51 FRONT STRUT TOP BEARING (4 IN STOCK)
These strut top bearings allow the steering to turn and are always advisable to change should the springs or struts need removal due to the weight of the vehicle.
E51 Front suspension arm Front Bush (4 IN STOCK)
This Front arm Front bush is made to the original patern using bonded rubber and metal inserts and presses into the lower front suspension arm. (For a high performance replacement bush kit for both sides I can advise the Powerflex bush kit below as mine have been on for 4 years with no problems)
Powerflex Front arm Front Bush kit (3 IN STOCK)
This bush kit fits on the front suspension arm at the front and comprises a complete kit to replace both side FRONT bushes
E51 Front arm Rear Bush Kit (NO STOCK, DUE IN MID JUNE)
This bush kit fits at the rear of the front suspension arms. It fits all model E51s from 2002 to 2010. When these bushes weaken they are known to multiply any slight brake vibrations and cause a thump on full lock. (For a high performance bush kit see the POWERFLEX kit below. I have had these fitted 3 years with no problems.)
Powerflex front arm Rear Bush Kit (3 SETS IN STOCK)
This bush kit fits on the front suspension arms at the rear and comprises a complete kit to replace both side REAR bushes.
E51 Front Lower Suspension Ball Joint (2 IN STOCK)
This ball joint kit comes complete with the lock nut and split pin
E51 Front anti roll bar bush 28mm diameter (NONE IN STOCK, ON SHORT SUPPLY, CONTACT ME ABOUT SUPERPRO POLLY REPLACEMENTS)
These front anti roll bar bushes are to fit E51s using a 28 mm diameter front anti roll bar.
E51 Front Anti Roll Bar Bush. 30mm bore size without flanges. (NO STOCK, DUE IN FEB)
These bushes fit the front of the E51 without flanges on a 30mm diameter anti roll bar. Sold individualy.
E51 Front Left (NSF) Anti Roll Bar Link (OUT OF PRODUCTION, REPLACEMENT ITEM SHOWN 2 BELLOW)
This Anti Roll bar Link fits on the NSF and when it fails can cause a knock over rough roads
E51 Front Right (OSF) Anti Roll Bar Link (OUT OF PRODUCTION, REPLACEMENT ITEM SHOWN BELLOW)
This Anti Roll Bar Link fits on the OSF and when it fails can cause a knock over rough roads
E51 FRONT DROP LINK. CAN BE USED EITHER SIDE (18 IN STOCK)
These front drop links can be used either side front on both 2.5 and 3.5 ltr
E51 Front Wheelbearing (0 STOCK, NO DUE DATE)
THESE BEARINGS ARE NO LONGER AVAILABLE
E51 Front Wheel Bearing (NO STOCK, PLEASE CONTACT ME FOR SPECIAL ORDER AVAILABILITY)
These E51 front wheel bearings are supplied by one of my suppliers in their boxes but they are Genuine Nissan bearings from NSK who supply Nissan with theirs. (DONT FORGET IF YOUR E51 IS RWD YOU WILL NEED THE HUB NUT BELOW).
E51 (RWD ONLY) Front Hub Nut. (20 IN STOCK)
This Genuine Nissan hub nut secures the front hub flange to the wheelbearing on the rear wheel drive E51 only. When changing wheelbearings this nut is damaged during removal so needs replacing when the wheel bearing is changed. (SORRY ABOUT THE MASSIVE INCREASE THAT NISSAN HAS IMPLIMENTED IN AUGUST 2017)
E51 Wheel Stud Front or Rear (20 IN STOCK )
These wheel studs are to replace damaged or broken studs on the E51. With a 2.25 ton vehicle its not worth chancing using a stud with a damaged or over tightened wheel nut the results could be fatal.
E51 Rear Wheelbearing (10 IN STOCK)
This Rear Wheelbearing fits all model E51s from 2002 to 2010
E51 Rear Suspension Arm Rear Hub Bush (NO STOCK DUE MID JUNE)
THIS BUSH FITS AT POSITION (C) AS SHOWN IN THE DIAGRAM ON THE E51 BUSH POSITIONS PAGE
E51 Rear Suspension Front Arm Hub Bush. (NO STOCK, DUE MID JUNE)
THIS BUSH FITS AT POSITION (B) IN THE DIAGRAM ON THE E51 BUSH POSITION PAGE
E51 Rear Radious arm Hub Bush (NO STOCK, DUE MID JUNE)
THIS BUSH FITS AT POSITION (A) AS SHOWN IN THE DIAGRAM ON THE E51 BUSH POSITION PAGE.
E51 Rear Anti Roll Bar Mounting Bush. 26mm diameter with flanges (4 IN STOCK)
These anti roll bar mountings have a 26mm diameter bore and flanges.
E51 Right Rear (OSR) Anti Roll Bar Link (3 IN STOCK)
This OSR Anti Roll Bar Link fits the E51
E51 Rear Left (NSR) Anti Roll Bar Link (3 IN STOCK)
This Anti Roll Barr Link fits the NSR on the E51
E51 Propshaft Centre Bearing (1 IN STOCK,)
This bearing supports the centre of the propshaft. Typical signs of failure are knocking or vibration through the body
E51 HB3 Main beam bulbs (1 SET IN STOCK )
These HB3 9005 65W Main beam bulbs (set of 2). Gives a nice white light to compliment the HID D2R bulbs fitted to the dip beams
E51 BONNET PROP STOWAGE CLIP (20 IN STOCK)
This clip secures the bonnet prop when not in use. These clips do go brittle and snap after a few years use.
E51 Rear Anti Roll Bar Bush. 25mm diameter No Flange (8 IN STOCK)
This rear anti roll bar bush has a 25mm diameter bore and no flanges.
E51 D2R HID Dip beam bulb set (3 SETS IN STOCK )
D2R HID Dip beam bulb (set of 2) Rated at 6000K
D1 SPEC THROTTLE CONTROLLER (Fits E51 models) (NO STOCK, NEW VERSION DUE IN FIRST WEEK IN SEPTEMBER)
This throttle controller lets you take full control of your 240 BHP and can easily be programed to give you faster thtrottle response or a smoother less rushed throttle control. This kit comes complete with the E51 throttle bridging loom and can be fitted in as little as 30 mins